In November, 2006, we produced the first generation of heat-assist cold laminator MF1600-M1.
MF1600-M1 is made through adding an infrared temperature control system to a common cold laminator. This design has greatly improved the laminating efficiency while reducing the cost and labor intensity.
The first MF1300-F2 laminating machine was created in June, 2006.
MF1300-F2 is a hot & cold laminator designed based on PHOTOS AND POSTER MAKERS.
In February of 2007, we developed the first generation of flatbed laminators used for home
decoration materials and building materials. The models include MF850-B1, MF1350-B1, and MF1950-B1.
In November, 2009, the second generation of flatbed laminators emerged, namely MF850-B3,
MF1350-B2, and MF1950-B2. The three models are separately upgraded from MF850-B1, MF1350-B1, and MF1950-B1, through improving the pressure methods and lifting ways for uniform, convenient pressure adjustment.
In February of 2010, the second generation of MF1600-F1 was produced. The new generation
developed on the basis of MF1600-F1 has been improved in film releasing method and rolling method. And the frictional force adjustment is convenient all the more.
In March, 2011, we developed the double sided laminator MF1600-F2 which can add plastic
coatings to both sides of substrates.
In January, 2012, the second generation heat-assist cold laminator MF1600-M1+ was
produced. MF1600-M1+ has a new roll used for film and materials feeding as well as materials take-up.
In March of 2012, we created new MF1300-F1+which is made with the same improvement methods
as that of MF1600-M1.
In March of 2012, MF1600-F1+ was made through adopting the same improvements as that
of MF1600-M1.
MF1700-A1 fully-auto hot and cold laminator developed in July of 2012, has a maximum
lamination width up to 1.62m.
In July of 2012, MF1700-C1 came into being. It can automatically adjust the rubber roll height and
laminating pressure.
In October, 2012, we specially designed a fully-auto laminator in allusion to PHOTOS AND
POSTER MAKERS.
MF1700-F2 was upgraded from MF1600-F2 in October, 2012. Its pressure system had been newly
designed to ensure uniform pressure and faster lamination speed.
In March of 2013, MF1600-M3 was made through adding a heating system to the traditional
manual cold laminator. It comes with higher rate of finished products as compared to traditional ones.
In March of 2013, we made MF1600-C3 series through adding pneumatic pressurizing
and pneumatic lifting to 1600-M3. MF1600-C has higher efficiency.
MF1600-M5 was designed in June, 2013. It is a heat-assist cold laminator with more stable
structure.
In July of 2013, MF1400-F1+ is developed on the basis of MF1300-F1+ series. It has
changed the pressure system, and comes with more stable structure.
English
Español
Русский
